Your Way to Drilling and Well Engineering

Presentation: Introduction to Casing

Subscribe to receive free email updates:

Delivered by FeedBurner

Follow us on facebook

Drilling Course

Drilling Course

Enter your email address:

Delivered by FeedBurner

Introduction to Casing

I-Introduction An oil and gas well is drilled in sections from the surface to the production zone. It is not possible to d...
Drilling Rig Systems

Although drilling rigs differ greatly in outward appearance and method of deployment, all rotary rigs have the same basic dr...
Choke Manifold Basics - Onshore -

There are many definitions of choke manifold. It can be defined as '' An arrangement of piping and special valves, called chokes. In...
Cementing Job Types

Primary Cementing Job The main objective of primary cementing is placing cement slurry behind the casing . This can be perfo...
Drilling Rigs Types

Rotary drilling rigs are used for most drilling operations today. The hole is drilled by rotating a bit and applying a downwar...
Introduction to Cementing

I- Introduction The cement is used as a sealing material while drilling an oil and gas well. Pumping cement behind the cas...
Introduction to Stuck Pipe

A drillstring is considered stuck if it cannot be pulled out of the hole. There are two main types of sticking mechanisms: dif...

Powered by Blogger.com